Show Frrp - Dell Z9500 Reference Manual

show frrp

Display the resilient ring protocol configuration.
Z9500
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
ring-id
summary
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Usage Executing this command without the optional ring-id command clears the
Information statistics counters on all the available rings. The system requires a command line
confirmation before the command executes. This command clears the following
counters:
•
•
•
Usage Executing this command without the optional ring-id command clears the
Information
statistics counters on all the available rings. The system requires a command line
confirmation before the command is executed. This command clears the following
counters:
•
•
760
Enter the ring identification number. The range is from 1 to
255
(OPTIONAL) Enter the keyword summary to view just a
summarized version of the Ring configuration.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
hello Rx and Tx counters
Topology change Rx and Tx counters
The number of state change counters
hello Rx and Tx counters
Topology change Rx and Tx counters
Force10 Resilient Ring Protocol (FRRP)