Version 7.4.1.0
protocol frrp
Enter the Resilient Ring Protocol and designate a ring identification.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
protocol frrp {ring-id}
To exit the ring protocol, use the no protocol frrp {ring-id} command.
Parameters
ring-id
Defaults
none
Command Modes
CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.4.1.0
Usage
This command places you into the resilient ring protocol. After executing this command, the
Information
command line prompt changes to conf-frrp.
show frrp
Display the Resilient Ring Protocol configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
ring-id
summary
Defaults
none
Command Modes
EXEC
Introduced.
Enter the ring identification number. Range: 1 to 255.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced
Enter the ring identification number. The range is 1 to 255
(OPTIONAL) Enter the keyword summary to view just a summarized
version of the Ring configuration.
645