10 | CR 10-X, CR 12-X, CR 15-X | Introduction
Intended Use
The digitizer is part of a CR system, further containing a cassette, image plate
and modality workstation. The CR system is used in a radiological
environment by qualified staff to read-out, process and route static X-ray
radiographic images.
The cassette is used to protect the image plate from light and damages during
X-ray exposure, transport and handling.
The image plate is used to capture the static X-ray radiographic images; the
image plate is scanned by the digitizer.
The digitizer is used to scan an X-ray exposed image plate; it results into a
digital image which is sent to the dedicated workstation.
The modality workstation is used to process and route the digital images from
the digitizer.
2491E EN 20150409 1543