Re-Erasing An Image Plate - AGFA ADC Compact Plus User Manual

Re-erasing an image plate

At the end of a normal or emergency digitizing cycle, the ADC Compact Plus
returns an erased image plate
erase the image plate before re-using it in order to prevent ghost images from
interfering with the image of interest:
•
If the image plate has not been used for more than 3 days.
In this case, the image plate may have been exposed to scattered radiation.
•
If an image plate has been exposed to an exceptionally high X-ray dose.
In this case, deep layers of the image plate may still retain a latent image after
standard erasure. Leave the image plate to rest at least one day before re-
erasing it.
You can erase image plates which you have given the status 'to be erased'
via the ID Station or image plates which have the status 'erased'. You can
erase an image plate or a batch of up to 9 plates.
32
. However, in the following cases, you must re-
2231C EN 20040224