NEC Univerge SV8100 Features And Specifications Manual page 372

Issue 1.0
Related Features
Call Arrival (CAR) Keys
Call Forwarding
Department Step Calling
Transfer
VM8000 InMail
Voice Response System (VRS)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-07-01 Department Group Pilot Numbers
– Dial
11-11-25 Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Setup for Each Extension
Group
11-11-26 Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Cancellation for Each
Extension Group
11-11-27 Service Code Setup (for Setup/
Entry Operation) – Destination of
Automatic Transfer Each
Extension Group
2 - 348
Description/Comments
Use to assign pilot numbers to each
Department Group set up.
Use this option to set the service
code to activate immediate
automatic transfer for ICM and
transferred calls to Department
Groups.
Use this option to set the service
code to deactivate immediate
automatic transfer for ICM and
transferred calls to Department
Groups.
Use this option to set the service
code for setting the destination for
immediate automatic transfer for
ICM and transferred calls to
Department Groups.
UNIVERGE SV8100
Assigned Data
Up to eight digits
(default not assigned)
MLT, SLT
(default = 602)
MLT, SLT
(default = 603)
MLT
(default = 604)
Department Calling
Level
1 2 3