Display Transceiver Interface - H3C s3600 series Command Manual

TX power(dBM)

display transceiver interface

Syntax
display transceiver interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver interface command to display main parameters of a single or all
transceivers.
Examples
# Display main parameters of the pluggable transceiver on interface GigabitEthernet 1/1/3.
<Sysname> display transceiver interface gigabitethernet 1/1/3
GigabitEthernet1/1/3 transceiver information:
Transceiver Type
Connector Type
Wavelength(nm)
Transfer Distance(km)
Digital Diagnostic Monitoring
Vendor Name
Ordering Name
Table 3-10 Description on the fields of the display transceiver interface command
transceiver information
Transceiver Type
Connector Type
Wavelength(nm)
Field
: 1000_BASE_LX_SFP
: LC
: 1310
: 10(9um)
: YES
: H3C
: SFP-GE-LX10-SM1310
Field
3-12
Description
Digital diagnosis parameter-TX power, in dBM,
with the precision to 0.01 dBM.
Description
Transceiver information of the interface
Transceiver type
Type of the connectors of the transceiver:
Optical connectors,
connector, developed by NTT) and LC (LC
connector, 1.25 mm/RJ45 optical connector
developed by Lucent).
Other connectors, including RJ-45 and CX4.
Optical transceiver: central wavelength of the
laser sent, in nm. If the transceiver supports
multiple wavelengths, every two wavelength
values are separated by a comma.
Electrical transceiver: displayed as N/A.
including SC (SC