Snmp-Server View - Dell Force10 Z9000 Reference Manual

password is stored in the configuration in an encrypted form and displayed as encrypted in the
show running-config command.
If you have an encrypted password, you can specify the encrypted string instead of the plain-
text password. The following command is an Example of how to specify the command with an
encrypted string.
Example
FTOS# snmp-server user privuser v3group v3 encrypted auth md5
9fc53d9d908118b2804fe80e3ba8763d priv des56
d0452401a8c3ce42804fe80e3ba8763d
Usage The following command is an example of how to enter a plain-text password as the string
Information authpasswd for user authuser of group v3group.
Example
FTOS#conf
FTOS(conf)# snmp-server user authuser v3group v3 auth md5
authpasswd
Usage The following command configures a remote user named
Information a security level of authNOPriv.
Example
FTOS#conf
FTOS(conf)# snmp-server user n3user ngroup remote 172.31.1.3
udp-port 5009 3
auth md5 authpasswd
Related show snmp user
Commands

snmp-server view

Configure an SNMPv3 view.
C-Series, E-Series, S-Series, S4810, Z-Series
Syntax snmp-server view view-name oid-tree {included | excluded}
To remove an SNMPv3 view, use the no snmp-server view view-name oid-tree
{included | excluded} command.
Parameters
view-name
oid-tree
included
excluded
Defaults none
Command Modes CONFIGURATION
1378
NOTE: The number of configurable users is limited to 16.
– displays the information configured on each SNMP user name.
Enter the name of the view (not to exceed 20 characters).
Enter the OID sub tree for the view (not to exceed 20 characters).
(OPTIONAL) Enter the keyword included to include the MIB family
in the view.
(OPTIONAL) Enter the keyword excluded to exclude the MIB family
in the view.
n3user with a v3 security model and