Show Storm-Control Unknown-Unicast - Dell Force10 Z9000 Reference Manual

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

show storm-control unknown-unicast

Display the storm control unknown-unicast configuration.

C-Series, E-Series, S-Series, Z-Series, S4810

show storm-control unknown-unicast [interface]

Command Modes

Command History

Version 8.3.11.1

Version 8.5.1.0

Version 8.3.7.0

Version 7.6.1.0

Version 7.5.1.0

Version 6.5.1.0

FTOS#show storm-control unknown-unicast gigabitethernet 11/1

Unknown-unicast storm control configuration

-------------------------------------------------

(OPTIONAL) Enter one of the following interfaces to display the

interface specific storm control configuration:

EXEC Privilege

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

For a 1-Gigabit Ethernet interface, enter the keyword

GigabitEthernet followed by the slot/port information.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet followed by the slot/port

information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE followed by the slot/ port information.

For a SONET interface, enter the keyword sonet followed by

the slot/port information.

Fast Ethernet is not supported.

Wred Profile