Logging Buffered - Dell Force10 Z9000 Reference Manual

E-Series legacy
command
Related
logging on
Commands
terminal lines.
logging trap

logging buffered

Enable logging and specify which messages are logged to an internal buffer. By default, all messages are logged to the
internal buffer.
C-Series, E-Series, S-Series, Z-Series
Syntax logging buffered [level] [size]
To return to the default values, use the default logging buffered command.
To disable logging stored to an internal buffer, use the no logging buffered command.
Parameters
level
size
Defaults level = 7; size = 40960 bytes
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Usage When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the
Information buffer size does not affect messages stored in the buffer.
Related
clear logging
Commands
default logging buffered
show logging
– enables the logging asynchronously to logging buffer, console, Syslog server, and
– enables logging to the Syslog server based on severity.
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following
equivalent words: emergencies, alerts, critical, errors,
warnings, notifications, informational, or
debugging. The default is 7 or debugging.
(OPTIONAL) Indicate the size, in bytes, of the logging buffer. The
number of messages buffered depends on the size of each message.
The range is 40960 to 524288. The default is 40960 bytes.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
– clears the logging buffer.
– returns the logging buffered parameters to the default setting.
– displays the logging setting and system messages in the internal buffer.
1383