Enable Ripng Triggerupdates - Extreme Networks ExtremeWare XOS Command Reference Manual

enable ripng triggerupdates

enable ripng triggerupdates {vlan <vlan-name> | tunnel <tunnel_name> |
[vlan | tunnel] all}
Description
Enables the trigger update mechanism. Triggered updates are a mechanism for immediately notifying a
router's neighbors when the router adds or deletes routes or changes their metric.
Syntax Description
vlan-name
tunnel-name
all
Default
Enabled.
Usage Guidelines
Triggered updates occur whenever a router changes the metric for a route and it is required to send an
update message immediately, even if it is not yet time for a regular update message to be sent. This will
generally result in faster convergence, but may also result in more RIPng-related traffic.
Example
The following command enables the trigger update mechanism on all IPv6 configured interfaces:
enable ripng triggerupdate
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies all interfaces.
enable ripng triggerupdates
1273