Configure Ospf Area External-Filter - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

OSPF Commands

configure ospf area external-filter

configure ospf area <area-identifier> external-filter [<policy-map> |none]

Configures an external filter policy.

Syntax Description

area-identifier

Usage Guidelines

For switches configured to support multiple OSPF areas (an ABR function), a policy can be applied to

an OSPF area that filters a set of OSPF external routes from being advertised into that area.

Using the none mode specifies that no external filter is applied.

The following command configures an external filter policy, nosales:

configure ospf area 1.2.3.4 external-filter nosales

This command was first available in ExtremeWare XOS 10.1.

Platform Availability

This command is available on all platforms.

Specifies the OSPF target area.

Specifies a policy.

Specifies not to apply an external filter (removes the existing policy, if any).

ExtremeWare XOS 11.3 Command Reference

Do you have a question about the ExtremeWare XOS and is the answer not in the manual?

Extremeware xos 11.3