RIPng Commands
configure ripng cost
configure ripng [vlan <vlan-name> | tunnel <tunnel-name>] cost <metric>
Description
Configures the cost (metric) of the interface.
Syntax Description
vlan-name
tunnel-name
metric
Default
The default setting is 1.
Usage Guidelines
The specified interface cost is added to the cost of the route received through this interface.
Example
The following command configures the cost for the VLAN finance to a metric of 3:
configure ripng vlan finance cost 3
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1256
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies a cost metric. Range is 1 to 15.
ExtremeWare XOS 11.3 Command Reference
Need help?
Do you have a question about the ExtremeWare XOS and is the answer not in the manual?