Unconfigure Rip - Extreme Networks ExtremeWare XOS Command Reference Manual

RIP Commands

unconfigure rip

unconfigure rip {vlan <vlan-name> | all}
Description
Resets all RIP parameters to the default for all VLANs or for the specified VLAN.
Syntax Description
vlan-name Specifies a VLAN name.
Default
All.
Usage Guidelines
Does not change the enable/disable state of the RIP settings.
Example
The following command resets the RIP configuration to the default for the VLAN finance:
unconfigure rip finance
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1246
ExtremeWare XOS 11.3 Command Reference