NEC NEAX 2000 Programming Manual page 1123

STATION/ATTENDANT CONTROLLED CONFERENCE
GENERAL DESCRIPTION
This feature permits a station user or Attendant (conference leader) to establish a conference among as
many as six or ten parties (including the conference leader).
STATION APPLICATION
All stations
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
To make a conference call using the access code:
1. Conference leader goes off hook, or an Attendant depresses a LOOP key.
2. Conference leader dials access code (A) for 6 or 10-party conference; receives Special Dial Tone.
If the CFT trunks are all busy or the leader is not assigned as the conference leader with service
feature class; Reorder Tone is heard. If a participant's line (Station or C.O./Tie Line) is busy,
repeat Step 2 after going on hook once (no need to dial access code (A) again).
3. Dial the number of the first party to be added to the conference.
4. Depress the Transfer key after the party answers and then dial the access code (B) to add then into
the conference.
5. Conference leader sequentially calls all desired parties and connects them to the CFT trunk by dial-
ling the assigned access code (B). The called party (Station/C.O./Tie) waits in the conference
mode until the leader is connected to the CFT trunk.
6. After connecting the last participant to the CFT trunk, the leader dials the access code (B) to enter
the CFT trunk and conference can be started.
To release a participant using the access code:
1. Conference leader goes on hook, or an Attendant depress the RLS key.
2. Go off hook or depress LOOP key again. Dial access code (C) for forced release and dial the par-
ticipant's number. (Conference number 1 to 5 for a 6-party conference, or 1 to 9 for a 10-party
conference.)
Note: Conference numbers are allocated in calling order from the conference leader.
3. Dialled conference number of Station or C.O./Tie Line party is released from CFT Trunk and party
hears Reorder Tone.
4. The leader returns to CFT trunk.
(6/10-PARTY CONFERENCE)
ND-91285-001(E)
DECEMBER, 1999
(1/4)
Page 341
Revision 1.0