NEC NEAX 2000 Programming Manual page 1099

SMART CONSOLE (SN708/SN709/SN712 ATTCON)
GENERAL DESCRIPTION
The SMART CONSOLE (SN708/SN709/SN712 ATTCON) operates on a switched-loop basis with a
maximum of six Attendant loops terminating on the associated Attendant Interface card at each console.
The Attendant uses these loops for answering, originating, holding, extending, and re-entering calls. When
ATTENDANT LOOP RELEASE is used, the number of loops is effectively increased to a maximum of 12
for each console.
STATION APPLICATION
SMART CONSOLE (SN708/SN709/SN712 ATTCON)
OPERATING PROCEDURE
Detailed operating procedures are provided in Features and Specifications of the services related to the
SMART CONSOLE.
SERVICE CONDITIONS
1. Each Firmware Processor (FP) can support up to 8 SMART CONSOLEs. A maximum of 8 SMART
CONSOLEs can be supported per system.
2. Each SMART CONSOLE requires a 1-pair cable.
ND-91285-001(E)
DECEMBER, 1999
(1/1)
Page 317
Revision 1.0