NEC NEAX 2000 Programming Manual page 1108

(1/2)
GENERAL DESCRIPTION
This feature allows a station user to dial frequently called numbers by dialling an access code and an
abbreviated code, or by depressing a feature key for SPEED CALLING - STATION.
STATION APPLICATION
All stations
OPERATING PROCEDURE
term
From a D :
To operate using dial access:
1. Depress the Redial key. The speaker and associated LED automatically turn on and Special
Dial Tone is received.
2. Dial the abbreviated code assigned to the desired number.
3. The number is dialled.
To program numbers in memory for dial access:
1. Depress the Feature key followed by the Redial key.
2. Dial the abbreviated code to be assigned.
3. Dial the desired telephone number including a trunk access code.
4. Depress the Feature key.
From a Single Line Telephone:
To operate:
1. Go off-hook and dial the SPEED CALLING - STATION feature access code.
2. Dial the abbreviated code assigned to the desired number.
3. The number is dialled.
To program number in memory:
1. Go off-hook and dial the SPEED CALLING - STATION programming code.
2. Dial the abbreviated code to be assigned.
3. Dial the trunk access code and the desired telephone number.
4. Restore the handset.
SERVICE CONDITIONS
1. Each abbreviated call code can store a maximum of 26 digits.
2. 10 memory blocks per system are assigned for SPEED CALLING - STATION. A maximum of 1,000
numbers can be stored in each memory block.
• MP without expansion memory (standard) :one memory block (10 buffers)
• MP with expansion memory (optional)
Page 326
Revision 1.0
SPEED CALLING - STATION
:10 memory blocks (10,000 buffers)
ND-91285-001(E)
DECEMBER, 1999