Siemens SINUMERIK 840D sl Commissioning Manual page 28

Principles of start-up
2.2 Editing files
Rename file
Cut-out/delete file
Displaying the file in the preview window
22
1. Select the required file.
2. Press the ">>" and "Properties" softkeys.
The "Properties of..." window opens.
The following data is displayed:
• Path:
• Name:
• Creation date and time:
• Date of change and time:
3. To change the file name, place the cursor in the "Name" entry field and
overwrite the name. Date of change and time are simultaneously
updated.
4. Press the "OK" softkey to save the new name.
1. Select the required file.
2. Press the "Cut" softkey.
The file is copied into the buffer and at the same time deleted from the
previous directory.
As the file is located in the buffer, you can also insert the file into
another directory.
- OR -
2. Press the ">>" and "Delete" softkeys.
You receive an alarm and you can delete the file by pressing the "OK"
softkey.
Press the "Cancel" softkey to cancel the delete operation.
1. Select the required file.
2. Press the ">>" and "Preview window" softkeys.
The preview window is displayed in the lower area of the window
together with the file contents.
Press the "Preview window" softkey again to close the window.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)