Connecting Power Supply To And Grounding The Controller - ABB OmniCore E10 Product Manual

3.5.5 Connecting power supply to and grounding the controller

Location of power supply connection
xx2100001301
Location of grounding point
xx2100001302
A
B
C
Product manual - OmniCore E10
3HAC079399-001 Revision: C
3.5.5 Connecting power supply to and grounding the controller
Note
How to manufacture a cable with connector is described in section
connector on page 72.
DANGER
A residual current device (RCD) must be installed.
C
Description
Live (L1)
Neutral (N) or Live (L2)
Protective Earth (PE), grounding
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
A
B
Fitting the
Continues on next page
73