7.2 Fronius power supply settings
7.2.1 Changing the Fronius power supply network settings
Change the network settings
Follow these steps to change the Fronius power supply network settings:
Application manual - Fronius TPS 320i/400i/500i/600i with RI-FB inside/i interface
3HAC065012-001 Revision: C
7.2.1 Changing the Fronius power supply network settings
1 On the Fronius power supply touch screen, tap Defaults and then select the
System tab. Select Network settings:
xx2100000469
2 In the Network settings menu, clear the DHCP check box to enable editing
of the menu items.
xx2100000470
© Copyright 2004-2021 ABB. All rights reserved.
7 Fronius EtherNet/IP configuration
Continues on next page
75