Connecting Power Supply To And Grounding The Controller - ABB OmniCore C90XT Product Manual

3.5.5 Connecting power supply to and grounding the controller

Location of power supply connection
xx1900001479
Location of grounding point
Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
3.5.5 Connecting power supply to and grounding the controller
Note
How to manufacture a cable with connector is described in section
connector on page 70.
DANGER
A residual current device (RCD) must be installed.
Note
The whole cabinet ground is connected to the X0.PE point.
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
Continues on next page
Fitting the
73