6 Options and Attachments
The following options and attachments are available for use with your header. Most come with installation
instructions. See your MacDon Dealer for availability and ordering information.
6.1 Reel
6.1.1 Multi-Crop Rapid Reel Conversion Kit
This kit decreases the time required to change the fore-aft
cylinder position on the reel support arm from the normal
operating location to a farther aft location that minimizes
disturbance of the crop. The reel fore-aft cylinders can also
be quickly relocated back to the normal operating position.
For use on double-reel units only.
MD #B5943
6.1.2 Lodged Crop Reel Finger Kit
The steel fingers attach to ends of every other tine bar and
help in clearing material in heavy, hard-to-cut crops such
as lodged rice.
Each kit contains three fingers for the cam end and three
fingers for the tail end of the reel. Hardware, installation
and adjustment instructions are included with the kit.
MD #B4831
147725
Figure 6.1: Center Arm – Left and Right Similar
Figure 6.2: Lodged Crop Finger
227
Revision A