Removing Crop Divider Rods; Using Rice Dividers - MacDon D65 Operator's Manual

Removing Crop Divider Rods

To remove divider rods, follow these steps:
1. Loosen bolt (B) and remove rod (A).
2. Store both rods on the inboard side of the
right endsheet.

Using Rice Dividers

Optional special rice dividers can be installed and used
when required. Refer to
269.
The installation and removal procedures are the same as
for the standard crop dividers.
169899
8.4.13 Rice Divider Rods, page
OPERATION
Figure 4.56: Crop Divider Rod
Figure 4.57: Stored Divider Rod
Figure 4.58: Divider Rod for Rice
73
Revision A