Removing Crop Divider Rods; Rice Dividers - MacDon D65 Operator's Manual

Removing Crop Divider Rods

To remove divider rods, follow these steps:
1. Loosen bolt (B) and remove rod (A).
2. Store both rods on the inboard side of the
right endsheet.

Rice Dividers

Optional special rice dividers can be installed and used
when required. See Section
page 259.
The installation and removal procedures are the same as
for the standard crop dividers.
169594
OPERATION
8.1.18 Rice Divider Rods,
Figure 4.57
Figure 4.58
Figure 4.59
74
Rev. C