Show Processes Ipc - Dell C9000 Series Reference Manual

show processes ipc

Display the IPC messaging used internally between Dell Networking OS processes.
C9000 Series
Syntax
show processes ipc [recv-stats | send-stats] [cp | rp | lp | pe
{slot-id | all}]
Parameters
recv-stats
send-stats
cp
rp
lp slot-id
pe pe-id
Defaults Display IPC message statistics on all switch CPUs: Control Processor, Route Processor,
and line cards.
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
Enter the keyword recv-stats to display information on IPC
receiver-side messages.
Enter the keyword send-stats to display information on IPC
sender-side messages.
Enter the keyword cp to view IPC message statistics on the
Control Processor CPU.
Enter the keyword rp to view IPC message statistics on the
Route Processor CPU.
Enter the slot ID of the line card for which you want to view IPC
message statistics. The range of switch slot IDs is from 0 to 11.
Enter linecard all to view IPC statistics for all line cards.
Enter the keyword pe to view IPC message statistics on the port
extender (PE) .The PE ID range is from 0 to 255.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
NOTE: The pe option is only visible when the extended
bridge feature is enabled.
Control and Monitoring 148