Freescale Semiconductor MCF52277 Reference Manual page 25

• Chapter 20, "Universal Serial Bus Interface – On-The-Go
universal serial bus (USB) On-the-Go module. The USB Specification, Revision 2.0 is a
recommended supplement to this chapter.
• Chapter 21, "Liquid Crystal Display Controller
programming model of the LCD controller.
• Chapter 22, "Touchscreen Controller/Analog-to-Digital
analog signal processor that may be configured as a touchscreen controller or general-purpose
ADC.
• Chapter 23, "FlexCAN,"
protocol. This chapter describes FlexCAN module operation and provides a programming model.
• Chapter 24, "Pulse-Width Modulation (PWM) Module,"
of the pulse width modulation (PWM) module. It includes a block diagram, programming model,
and functional description.
• Chapter 25, "Synchronous Serial Interface (SSI),"
programming model.
• Chapter 26, "Real-Time Clock,"
programming model.
• Chapter 27, "Programmable Interrupt Timers (PIT0–PIT1),"
timers, including operation in low-power mode.
• Chapter 28, "DMA Timers (DTIM0–DTIM3),"
DMA timer modules. These 32-bit timers provide input-capture and reference-compare
capabilities with optional signaling of events using interrupts or triggers. This chapter also provides
programming examples.
• Chapter 29, "DMA Serial Peripheral Interface (DSPI),"
operation description, including details of the DSPI's internal storage organization. The chapter
concludes with the programming model and a timing diagram.
• Chapter 30, "UART Modules,"
receiver/transmitters (UARTs) implemented on the device and includes programming examples.
• Chapter 31, "I2C Interface,"
synchronization, and I
• Chapter 32, "Debug Module,"
• Chapter 33, "IEEE 1149.1 Test Access Port (JTAG),"
Joint Test Action Group (JTAG) implementation. It describes those items required by the IEEE
1149.1 standard and provides additional information specific to the device. For internal details and
sample applications, see the IEEE 1149.1 document.
Suggested Reading
This section lists additional reading that provides background for the information in this manual as well as
general information about ColdFire architecture.
Freescale Semiconductor
describes the implementation of the controller area network (CAN)
describes the real-time clock module operation and provides a
describes the use of the universal asynchronous
2
describes the I C module, including I
2
C programming model registers.
describes the hardware debug support in the device.
MCF52277 Reference Manual, Rev. 0
Module," provides an overview of the
(LCDC)," describes the operation and
Converter," describes operation of the
describes the configuration and operation
describes SSI module operation and provides a
describes the functionality of the PIT
describes the configuration and operation of the
provides a feature-set overview and an
2
C protocol, clock
describes configuration and operation of the
xxv