Chapter 2
<Card Reader Mounting Kit-B1>
[1]
[2]
[3]
[4]
[5]
2.6.3 Installation Procedure
When you have installed the Card Reader-C1, make the following selections, COPIER>
FUNCTION> INSTALL> CARD, and enter the card number you will be using; otherwise,
the card will not be recognized upon insertion.
Be sure to go through the following steps on the host machine before starting the work:
2-32
Card reader base
Relay harness
TP screw (M4x25)
TP screw (M4x8)
Toothed washer
T-2-4
F-2-66
1 pc.
1 pc.
1 pc.
1 pc.
2 pc.
0007-2709