Manual Relief Valve; Engine Cover Removal And Installation - TOHATSU BFT 200D Owner's Manual

SERVICING YOUR OUTBOARD MOTOR

MANUAL RELIEF VALVE

MANUAL RELIEF VALVE
POWER
(To hold)
The outboard motor can be tilted
manually after opening the manual
relief valve. This feature enables the
outboard motor to be tilted up or
down when no battery is connected.
For manual tilting, use a screwdriver
to turn the valve counterclockwise 1
or 2 turns. Close the valve firmly
after positioning the outboard motor.
Be sure the valve is closed before
operating the outboard motor. If the
valve is not closed, the outboard
motor will tilt up when operated in
reverse.
88
ENGINE COVER REMOVAL
AND INSTALLATION
Removal
Front
MANUAL
(To release)
Side
ENGINE COVER LATCH (each side)
1. Pull all the engine cover latches.
2. Remove the engine cover by lifting it
straight up from the outboard motor.
ENGINE COVER LATCH
Installation
COVER LOCKS
COVER SIDE
Side
MAIN BODY SIDE
1. Place the engine cover on the main body.
2. Slide the engine cover so that the
cover lock on the cover aligns with
the lock in the main body.
Front
ENGINE COVER LATCH