6. PRE-OPERATION CHECKS
BFT200D/BFT225D/BFT250D is
4-stroke, water cooled outboard
motor which uses unleaded regular
gasoline for fuel. It also requires the
engine oil. Check the following
before operating the outboard motor.
CAUTION
Perform the following
pre-operation checks with the
engine stopped.
Before each use, look around and
underneath the engine for signs of oil
or gasoline leaks.
56
Engine Cover Removal/Installation
Front
ENGINE COVER LATCH
Side
ENGINE COVER LATCH (each side)
1. Pull all the engine cover latches.
2. Remove the engine cover by taking
it up.
https://www.boat-manuals.com/
<Installation>
COVER LOCKS
COVER SIDE
Side
MAIN BODY SIDE
1. Place the engine cover on the main
body.
2. Slide the engine cover so that the
cover lock on the cover is mated
with the lock in the main body.