Pre-Operation Checks; Engine Cover Removal/Installation - TOHATSU BFT 150D Owner's Manual

BFT150D is 4-stroke, water cooled
outboard motor which uses unleaded
regular gasoline for fuel. It also
requires the engine oil. Check the
following before operating the
outboard motor.
CAUTION
Perform the following
pre-operation checks with the
engine stopped.
Before each use, look around and
underneath the engine for signs of oil
or gasoline leaks.

Engine Cover Removal/Installation

Front
ENGINE COVER LATCH
Side
ENGINE COVER LATCH (each side)
1. Pull all the engine cover latches.
2. Remove the engine cover by taking
it up.

6. PRE-OPERATION CHECKS

<Installation>
COVER SIDE
Side
1. Place the engine cover on the main
body.
2. Slide the engine cover so that the
cover lock on the cover is mated
with the lock in the main body.
COVER LOCKS
MAIN BODY SIDE
41