Issue 2.0
SV9100 System Hardware Manual
13.
Set the height of the tilt leg on the DCL-60-1/DCZ-60-2
CONSOLE to match the tilt leg on the multiline terminal.
14.
Attach the side panel to the side of the DCL-60-1/DCZ-60-2
CONSOLE.
15.
Return the multiline terminal and DCL-60-1/DCZ-60-2
CONSOLE to the buttons side up position.
16.
Connect the digital cable to the LINE jack (DT300/DT400
only).
17.
Connect the AC Adapter cable. See
AC Adapter Cable on page
Figure 5-102 Connect AC Adapter Cable
18.
Complete the installation by reattaching both plastic panels
to the front of the multiline terminal.
Figure 5-103 DCL-60-1/DCZ-60-2 CONSOLE Installed
Figure 5-102 Connect
5-95.
5-95