Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
18.2 LLDP-MED Commands
18.2.1 lldp med
This command is used to enable the MED of LLDP advertise capability. The command is
available in the interface configuration mode. The 'all' option is also available in the
Global config mode to enable on all the ports.
Format
Mode
Format
Mode
18.2.2 no lldp med
This command is used to MED. The all option is available in the Global config mode. The
'all' option is also available in the Global config mode to disable on all the ports.
Format
Mode
Format
Mode
18.2.3 lldp med confignotification
This command is used to configure all the ports to send the topology change notification.
The command is available in the interface configuration mode. The 'all' option is also
available in the Global config mode to enable on all the ports.
Format
Mode
Format
Mode
LLDP and LLDP-MED Commands
lldp med all
Global Config
lldp med
Interface Config
no lldp med all
Global Config
no lldp med
Interface Config
lldp med confignotification
Global Config
lldp med confignotification
Interface Config
v4.1, October 2008
all
18-9