Area Virtual-Link Transmit-Delay - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

area virtual-link transmit-delay

[ no ] area { areaId | areaIdInt } virtual-link ipAddress transmit-delay transmDelay
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines an OSPF virtual link and the estimated time it takes to transmit a link-state
Description
update packet on the virtual link. The no version removes the virtual link's transmit
delay.
Options
Router Configuration
Mode
areaId OSPF area ID in IP address format
areaIdInt OSPF area ID as a decimal value in the range 0–4294967295
ipAddress IP address associated with the virtual link neighbor
transmDelay LSA transmit delay; an integer in the range 0–3600 seconds;
default value is 1 second
Chapter 2: A Commands
area virtual-link transmit-delay
141