Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1478

Complete Software Guide for Junos
arp
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1374
®
OS for EX Series Ethernet Switches, Release 10.4
arp ip-address (mac | multicast-mac) mac-address <publish>;
[edit interfaces interface-name unit logical-unit-number family inet address address],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet address address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For Ethernet, Fast Ethernet, and Gigabit Ethernet interfaces only, configure Address
Resolution Protocol (ARP) table entries, mapping IP addresses to MAC addresses.
—IP address to map to the MAC address. The IP address specified must be
ip-address
part of the subnet defined in the enclosing
mac mac-address —MAC address to map to the IP address. Specify the MAC address as
six hexadecimal bytes in one of the following formats:
. For example,
nn:nn:nn:nn:nn:nn
multicast-mac mac-address
the multicast MAC address as six hexadecimal bytes in one of the following formats:
or
nnnn.nnnn.nnnn nn:nn:nn:nn:nn:nn
—(Optional) Have the router or switch reply to ARP requests for the specified IP
publish
address. If you omit this option, the router or switch uses the entry to reach the
destination but does not reply to ARP requests.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Static ARP Table Entries on page 1328
address
or
0011.2233.4455
—Multicast MAC address to map to the IP address. Specify
. For example,
0011.2233.4455
statement.
or
nnnn.nnnn.nnnn
.
00:11:22:33:44:55
or
00:11:22:33:44:55
Copyright © 2010, Juniper Networks, Inc.
.