Aggregated-Ether-Options - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

aggregated-ether-options

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
aggregated-ether-options {
(flow-control | no-flow-control);
lacp {
(active | passive);
admin-key key;
periodic interval;
system-id mac-address;
}
(link-protection | no-link-protection);
link-speed speed;
(loopback | no-loopback);
minimum-links number;
}
[edit interfaces aex]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the aggregated Ethernet properties of a specific aggregated Ethernet interface.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch on
page 940
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between
an EX4200 Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution
Switch on page 947
Configuring Aggregated Ethernet Interfaces (CLI Procedure) on page 1330
Configuring Aggregated Ethernet LACP (CLI Procedure) on page 1334
Understanding Aggregated Ethernet Interfaces and LACP on page 1244
See the Junos OS Network Interfaces Configuration Guide.
Chapter 61: Configuration Statements for Interfaces
1373