Table 207: Protocol Families And Supported Interface Types - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Options

Table 207: Protocol Families and Supported Interface Types

Family Description
Circuit cross-connect protocol family
ccc
Ethernet switching protocol family
ethernet-
switching
inet IPv4 protocol family
IPv6 protocol family
inet6
Junos OS protocol family for IS-IS
iso
traffic
MPLS protocol family
mpls
Required Privilege
Level
1386
®
OS for EX Series Ethernet Switches, Release 10.4
See Table 207 on page 1386 for protocol families available on the switch interfaces. Different
protocol families support different subsets of the interfaces types on the switch.
Interface types on the switch are:
Aggregated Ethernet ( ae
Gigabit Ethernet ( )
ge
Interface-range configuration (
Loopback ( )
lo0
Management Ethernet (
Routed VLAN interface (RVI) (
Virtual management Ethernet (
10-Gigabit Ethernet ( )
xe
If you are using an interface range, the supported protocol families are the ones supported
by the interface types that compose the range.
Not all interface types support all
supported substatements for a particular protocol family configuration.
Supported Interface Types
ae
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
)
interface-range )
)
me0
)
vlan
)
vme
substatements. Check your switch CLI for
family
ge lo0 me0 vlan vme xe
Copyright © 2010, Juniper Networks, Inc.