Interface-Range - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

interface-range

Syntax
Hierarchy Level
Release Information
Description
Copyright © 2010, Juniper Networks, Inc.
interface-range name {
accounting-profile name;
description text;
disable;
ether-options {
802.3ad {
aex;
(backup | primary);
lacp {
force-up;
}
}
(auto-negotiation | no-auto-negotiation);
(flow-control | no-flow-control);
link-mode mode;
(loopback | no-loopback);
speed (auto-negotiation | speed);
}
(gratuitous-arp-reply | no-gratuitous-arp-reply);
member interface-name;
member-range starting-interface name to ending-interface name;
mtu bytes;
no-gratuitous-arp-request;
traceoptions {
flag flag;
}
(traps | no-traps);
unit logical-unit-number {
accounting-profile name;
bandwidth rate;
description text;
disable;
family family-name {...}
proxy-arp (restricted | unrestricted);
(traps | no-traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
[edit interfaces]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Group interfaces that share a common configuration profile.
NOTE: You can use interface ranges only for Gigabit and 10-Gigabit Ethernet
interfaces.
Chapter 61: Configuration Statements for Interfaces
1391