Aggregated-Devices - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

aggregated-devices

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
1372
®
OS for EX Series Ethernet Switches, Release 10.4
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the interface address.
address —Address of the interface.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Protocol Family
negotiate-address
unnumbered-address (Ethernet)
Junos OS System Basics Configuration Guide
aggregated-devices {
ethernet {
device-count number;
}
}
[edit chassis]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure properties for aggregated devices on the switch.
The remaining statements are explained separately.
Aggregated devices are disabled.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch on
page 940
Configuring Aggregated Ethernet Interfaces (CLI Procedure) on page 1330
Understanding Aggregated Ethernet Interfaces and LACP on page 1244
See the Junos OS Network Interfaces Configuration Guide.
Copyright © 2010, Juniper Networks, Inc.