Link-Protection - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

link-protection

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
link–protection {
disable;
(revertive |non-revertive);
}
[edit interfaces aex aggregated-ether-options]
[edit interfaces aex aggregated-ether-options lacp]
Statement introduced in Junos OS Release 8.3.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for ,
disable revertive
9.3.
On the router, for aggregated Ethernet interfaces only, configure link protection. In addition
to enabling link protection, a primary and a secondary (backup) link must be configured
to specify what links egress traffic should traverse. To configure primary and secondary
links on the router, include the
ge-fpc/pic/port gigether-options 802.3ad aex]
fe-fpc/pic/port fastether-options 802.3ad aex]
To configure those links on the switch, configure those statements at the
ge-fpc/pic/port ether-options 802.3ad aex]
xe-fpc/pic/port ether-options 802.3ad aex]
The statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Aggregated Ethernet Link Protection on page 1335
Chapter 61: Configuration Statements for Interfaces
, and statements added in Junos OS Release
non-revertive
and statements at the
primary backup
hierarchy level or the
hierarchy level.
hierarchy level or at the
hierarchy level.
[edit interfaces
[edit interfaces
[edit interfaces
[edit interfaces
1403