Loopback (Aggregated Ethernet, Fast Ethernet, And Gigabit Ethernet); Member - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

loopback (Aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

member

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
(loopback | no-loopback);
[edit interfaces interface-name aggregated-ether-options],
[edit interfaces interface-name ether-options],
[edit interfaces interface-name fastether-options],
[edit interfaces interface-name gigether-options],
[edit interfaces interface-range name ether-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For aggregated Ethernet, Fast Ethernet, Gigabit Ethernet, and 10-Gigabit Ethernet
interfaces, enable or disable loopback mode.
NOTE: By default, local aggregated Ethernet, Fast Ethernet, Tri-Rate Ethernet
copper, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces connect to a
remote system.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Ethernet Loopback Capability on page 1326
member interface-name;
[edit interfaces interface-range interface-range-name]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Specify the name of the member interface belonging to an interface range on the EX
Series switch.
—Name of the interface.
interface-name
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 1284
Understanding Interface Ranges on EX Series Switches on page 1246
EX Series Switches Interfaces Overview on page 1239
See the Junos OS Network Interfaces Configuration Guide.
Chapter 61: Configuration Statements for Interfaces
1405