Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1492

Complete Software Guide for Junos
filter
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1388
®
OS for EX Series Ethernet Switches, Release 10.4
filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
[edit interfaces interface-name unit logical-unit-number family family],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family family]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Apply a filter to an interface. You can also use filters for encrypted traffic. When you
configure filters, you can configure them under the
, or only.
mpls vpls
group filter-group-number —Define an interface to be part of a filter group. The default
filter group number is 0.
Range: 0 through 255
—Name of one filter to evaluate when packets are received on the
input filter-name
interface.
output filter-name —Name of one filter to evaluate when packets are transmitted on the
interface.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Applying a Filter to an Interface
Configuring Firewall Filters (CLI Procedure) on page 3289
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 1284
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3261
Junos OS Services Interfaces Configuration Guide
Junos OS Policy Framework Configuration Guide
Junos OS System Basics Configuration Guide
family ethernet-switching ,
Copyright © 2010, Juniper Networks, Inc.
inet , inet6 ,