Link-Speed (Aggregated Ethernet) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

link-speed (Aggregated Ethernet)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1404
®
OS for EX Series Ethernet Switches, Release 10.4
link-speed speed;
[edit interfaces aex aggregated-ether-options],
[edit interfaces interface-range name aggregated-ether-options],
[edit interfaces interface-range name aggregated-sonet-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For aggregated Ethernet interfaces only, set the required link speed.
speed —For aggregated Ethernet links, you can specify
a complete decimal number or as a decimal number followed by the abbreviation
(1000), (1,000,000), or
k m
Aggregated Ethernet links on the M120 router can have one of the following speed values:
—Links are 100 Mbps.
100m
—Links are 10 Gbps.
10g
—Links are 1 Gbps.
1g
—Links are OC192 or STM64c.
oc192
Aggregated Ethernet links on EX Series switches can be configured to operate at one of
the following speed values:
10m
100m
1g
10g
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Aggregated Ethernet Link Speed on page 1336
Configuring Aggregated Ethernet Interfaces (CLI Procedure) on page 1330
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch on
page 940
speed
(1,000,000,000).
g
Copyright © 2010, Juniper Networks, Inc.
in bits per second either as