Honda Accord 2008 Manual page 2236

07/11/02 09:36:29 61TA0000_220_0206
17. Turn the ignition switch to LOCK (0).
18. Do the combination light switch test (see page
22-210).
Is the combination light switch OK ?
YES
−
NO
19. Disconnect driver's under-dash fuse/relay box
connector R (24P).
20. Check for continuity between the driver's under-
dash fuse/relay box connector R (24P) terminals
and the combination light switch 12P connector
terminals as shown:
Driver's under-dash
＊０２
COMBI GND (BLK)
COMBINATION LIGHT SWITCH 12P CONNECTOR
Is there continuity?
YES
−
NO
− Go to step 19.
Replace the combination light switch.
Combination light
fuse/relay box switch 12P connector
connector R (24P)
3
8
21
22
DRIVER'S UNDER-DASH FUSE/RELAY BOX
CONNECTOR R (24P)
Wire side of female terminals
H/L ON SW (BRN)
H/L DIMMER
PASSING SW (GRN)
SW (LT BLU)
H/L DIMMER
PASSING
SW (LT BLU)
SW (GRN)
H/L ON SW (BRN)
COMBI GND (BLK)
Wire side of female terminals
− Go to step 21.
Repair an open in the wire.
21. Check for continuity between the driver's under-
dash fuse/relay box connector R (24P) terminals as
shown:
Is there continuity?
YES −
NO −
under-dash fuse/relay box (see page 22-84).
12
10
6
4
From terminal To terminal
21 6, 7, 8, 22
22 6, 7, 8
Repair a short between the wires.
Faulty driver's MICU; replace the driver's
22-203