Honda Accord 2008 Manual page 2233

Hide thumbs Also See for Accord 2008:
Table of Contents

Advertisement

07/11/02 09:36:28 61TA0000_220_0203
Exterior Lights
DTC Troubleshooting (cont'd)
DTC B1277:
Combination Light Switch AUTO
Position Circuit Malfunction
NOTE: If you are troubleshooting multiple DTCs, be
sure to follow the instructions in B-CAN System
Diagnosis Test Mode A (see page 22-120).
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to LOCK (0) and then back
to ON (II).
3. Turn the combination light switch to the PARKING
(SMALL), AUTO, and ON (low beam) positions, and
then to the OFF position.
4. Wait for 6 seconds or more.
5. Check for DTCs with the HDS.
Is DT C B127 7 indicated?
YES
Go to step 6.
NO
Intermittent failure, the system is OK at this
time. Check for loose or poor connections.
6. Select LIGHTING from the BODY ELECTRICAL
system select menu, and enter the DATA LIST.
7. Check each combination light switch position value
with the DATA LIST menu.
When the combination light switch is turned OFF
Headlight Switch (OFF)
Headlight Switch (PARKING)
Headlight Switch (AUTO)
Headlight Switch (HEADLIGHT)
When the combination light switch is turned to
PARKING (SMALL)
Headlight Switch (OFF)
Headlight Switch (PARKING)
Headlight Switch (AUTO)
Headlight Switch (HEADLIGHT)
22-200
Data List
Value
ON
OFF
OFF
OFF
Data List
Value
OFF
ON
OFF
OFF
When the combination light switch is turned to
AUTO
Data List
Headlight Switch (OFF)
Headlight Switch (PARKING)
Headlight Switch (AUTO)
Headlight Switch (HEADLIGHT)
When the combination light switch is turned ON
(HEADLIGHT)
Data List
Headlight Switch (OFF)
Headlight Switch (PARKING)
Headlight Switch (AUTO)
Headlight Switch (HEADLIGHT)
Are all data list values correct?
YES
Faulty driver's MICU; replace the driver's
under-dash fuse/relay box (see page 22-84).
NO
Go to step 8.
8. Turn the ignition switch to LOCK (0).
9. Disconnect the combination light switch 12P
connector.
10. Turn the ignition switch to ON (II).
11. Select LIGHTING from the BODY ELECTRICAL
system select menu, and enter the DATA LIST.
12. Check each combination light switch position value
with the DATA LIST menu.
When the combination light switch is turned OFF
Data List
Headlight Switch (OFF)
Headlight Switch (PARKING)
Headlight Switch (AUTO)
Headlight Switch (HEADLIGHT)
Are all data list values indicated OF F ?
YES
Go to step 16.
NO
Go to step 13.
TA08A00K769000Y1277FAAT00
Value
OFF
OFF
ON
OFF
Value
OFF
ON
OFF
ON
Value
OFF
OFF
OFF
OFF

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents