Machine Data Display Filter - Siemens SINUMERIK 840DiE sl Manual

01/2007
11.2.3

Machine data display filter

Machine data
areas
Display filter
Display groups
Expert mode
Index from
to
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
Through the use of the machine data display filter, it is possible to reduce the
number of displayed machine data of a certain area, e.g. general machine data
or channel machine data, for special purposes.
Display filters are provided for the following machine data areas:
S
General machine data
S
Channel–specific machine data
S
Axis–specific machine data
S
Drive machine data
To parameterize the display filter of a machine data area, use the vertical soft-
key Display Options... in the appropriate machine data area.
Example:
Display filter for channel machine data
Operating area: Commissioning –> Machine Data –> Channel MD –> Display
Options...
Note
The parameter: Display Filter of the corresponding machine data description
indicates to which display group a machine data item belongs.
Reference: /LIS/ Lists
A display group contains machine data within a machine data area that belong
to the same topic.
By selecting/deselecting the display groups, the number of displayed machine
data of the current machine data area increases or decreases.
If the Expert mode display filter is disabled, only the machine data of a machine
data range are displayed that are required for the basic functionality of the NCK.
The index filter refers to the machine data fields. On the display, these machine
data can be identified by the field index attached to the machine data string.
Example: 10000 AXCONF_MACHAX_NAME_TAB[index]
If the index filter is activated, machine data fields are only displayed in the spe-
cified index area.
11 NCK Commissioning with HMI Advanced
11.2 Machine and setting data
11-291