Clear Pim Register - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

clear pim register

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear pim register clear pim register
2158
clear pim register
<inet | inet6>
<instance instance-name>
<interface interface-name>
<logical-system (all | logical-system-name)>
clear pim register
<inet | inet6>
<instance instance-name>
<interface interface-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Clear Protocol Independent Multicast (PIM) register message counters.
none—Clear PIM register message counters for all family addresses, instances, and
interfaces.
inet | inet6 —(Optional) Clear PIM register message counters for IPv4 or IPv6 family
addresses, respectively.
instance instance-name —(Optional) Clear register message counters for a specific
PIM-enabled routing instance.
—(Optional) Clear PIM register message counters for a specific
interface interface-name
interface.
logical-system (all | logical-system-name)
systems or on a particular logical system.
The command cannot be used to clear the PIM register state on a
clear pim register
backup Routing Engine when nonstop active routing is enabled.
clear
show pim statistics on page 2235
clear pim register on page 2158
When you enter this command, you are provided feedback on the status of your request.
user@host> clear pim register
—(Optional) Perform this operation on all logical