Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.11.1
7.6.1.0
7.5.1.0
6.1.1.0
Usage Information The number parameter in the ntp trusted-key command must be the same number
as the number parameter in the ntp authentication-key command. If you change
the ntp authentication-key command, you must also change the ntp trusted-
key command.
Related
ntp authentication-key
Commands
ntp authenticate
show clock
Display the current clock settings.
C9000 Series
Syntax
show clock [detail]
From a PE console, use show clock.
Parameters
detail
Command Modes
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets an authentication key for NTP.
— enables the NTP authentication parameters you set.
(OPTIONAL) Enter the keyword detail to view the source
information of the clock.
•
EXEC
•
EXEC Privilege
System Time and Date
2174