Rep 5.8 Lower Chute Assembly; Rep 5.9 Retard Roll - Xerox DocuColor 2240 Service Manual

REP 5.8 Lower Chute Assembly

Parts List on PL 20.5
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open the DADF Top Cover.
2. Remove the DADF Front Cover (PL
3. Remove the Entrance Tray (PL 20.1).
4. Remove the Lower Chute Assembly
2
Loosen screws (2)
Figure 1 Removing Lower Chute Assembly
Initial issue
DC 3535/2240/1632, WC M24
WARNING
20.1).
(Figure 1).
1
Open the Document
Feed Upper Chute
3
Remove Lower
Chute Assembly

REP 5.9 Retard Roll

Parts List on PL 20.5
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open Top Cover.
2. Remove the DADF Front Cover
3. Remove the Entrance Tray (PL
4. Remove Lower Chute Assembly
5. Remove Retard Roll (Figure 1).
3
Remove Clip
4
Remove Shaft
5
Remove
Bracket
Figure 1 Removing Retard Roll
Replacement
While replacing Retard Roll, make sure that Retard Roll Plastic Guide is in correct position.
09/03
4-29
WARNING
(PL 20.1).
20.1).
(REP 5.8).
2
Remove Spring
6
Remove Shaft
and Retard Roll
CAUTION
Repairs and Adjustments
REP 5.8, REP 5.9
1
Note the
position of
plastic guide