REP 14 Output Tray Assembly
Parts List on:
PL 3
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Preparation
•
Remove the ADF cover,
•
Remove the front door and the side covers,
•
Remove the CPU shield plate,
•
Remove the speaker,
•
Remove the platen assembly,
•
Remove the back cover,
Removal
1. Unscrew the two mounting screws on the left and right side on the output tray assembly, Fig-
ure 1.
Phaser 3100 MFP
WARNING
REP
2.
REP
11.
REP
12.
REP
16.
REP
13.
Figure 1
REP
3.
04/08
Repairs and Adjustments
4-37