Enable Snmp Traps; Disable Snmp Traps - Panasonic ZEQUO 2200 Operating Instructions Manual

44.10. enable snmp traps

 Description
This command is used to enable SNMP trap support on the Switching Hub.
 Format
enable snmp traps
 Parameters
None.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To enable SNMP trap support:
Zxxx0:admin#enable snmp traps
Command: enable snmp traps
Success.
Zxxx0:admin#

44.11. disable snmp traps

 Description
This command is used to disable SNMP trap support on the Switching Hub.
 Format
disable snmp traps
 Parameters
None.
 Restrictions
Only Administrator and Operator-level users can issue this command.
44. Network Management Commands
403