5. Basic Management Commands
5.14. enable clipaging
Description
This command is used to enable pausing of the screen display when show command
output reaches the end of the page. The default setting is enabled.
Format
enable clipaging
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Only Administrator and Operator-level users can issue this command.
Zxxx0:admin#enable clipaging
Command: enable clipaging
Success.
Zxxx0:admin#
5.15. disable clipaging
Description
This command is used to disable pausing of the screen display when show command
output reaches the end of the page. The default setting is enabled.
Format
disable clipaging
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
40